Wednesday, September 28, 2011

ADV.1 Wheels shows off an Enzo...



ADV.1 Wheels had the opportunity of adding some professional touches to a Ferrari Enzo. ADV.1 states "The wheel setup was completely our choice so we opted to go with one of our new styles for 2012 release. The ADV5.2SL which is a modified version of our existing ADV5.2 style, however this is the fat free version. 3 styles will be released using our superlight weight reduction process including this one shown in our 3 piece track spec configuration. The lightweight model is vehicle specific in terms of design and load rating in order to get the lowest possible weight based on the load rating of the vehicle it’s intended for. In this case the Enzo, however without enough time to engineer them to be as light as they really could be by testing sample pieces for load rating analysis this set was beefed up for safety purposes. We have however done so with the 1 piece version which has shown results under 18 pounds in some sizes / applications such as the Lamborghini Gallardo 18×12 race setup.


For the Enzo, we knew that only one tire was going to provide the epicness it deserved, the Pirelli 375/20/21 rear. We contacted Jason at Pirelli tires and without hesitation he had a complete set on it’s way to us, huge thanks to Pirelli Tires for coming through on this project. The wheel was designed around the massive rear in a 21×13 size with a 20×8.5 front using their 245/30/20. The wheel finish was our popular polished gunmetal lip / matte black center combination for this project as it’s subtle yet at the same time different from what you’d normally see."




No comments:

Post a Comment